Download Cameras SIGMA Photo Pro

SIGMA Photo Pro 6.5 is an exclusive software package for displaying and manipulating RAW images taken with all SIGMA digital cameras on your computer.

It is possible to download the installer program of SIGMA Photo Pro 6.5.3 for Windows and SIGMA Photo Pro 6.5.3 for Macintosh. Please ensure that you read the system requirements for this software before downloading them.

Who can download & update?

Customers who use SIGMA dp Quattro series, SIGMA sd Quattro series, SIGMA SD and DP series cameras.

SIGMA
Photo Pro 6.5.3
for Windows

Main Features

Ver.6.5.3

  • It is compatible with the X3I files taken in the SFD Mode of the SIGMA dp Quattro series.
  • It has optimized the effect of the overexposure correction function.
* The latest version of SIGMA Photo Pro 6.5.3 is required to process the RAW data (X3F and X3I files) taken by the dp Quattro series after the firmware update announced on April 26th. * For customers who cannot use the GPU Acceleration Mode, please refer to this webpage.

Ver.6.5.2

  • It has improved the noise reduction during the RAW development from the X3F files of dp Quattro series and sd Quattro series.
  • It has improved the processing speed when the GPU Acceleration Mode is activated in the environmental setting (based on the computer environment, the effect may vary).
  • It corrects the phenomenon that some operational errors occur in specific computer environments, when GPU Acceleration Mode is activated.
  • It corrects the phenomenon that depending on a computer environment, an error occurs during RAW development, when the GPU Acceleration Mode is activated and multiple images are selected.
* Since SIGMA Photo Pro ver. 6.5.0, it has changed the system requirements to equivalent to Intel Core 2 Duo Processor or more (equivalent to Intel Core i series is recommended) and 3GB or higher RAM (8GB or more is recommended). In addition, it is not possible to use the functions of printing, slideshow and multiple displays of Review Windows in the 32bit OS system. To use these functions, please use SIGMA Photo Pro 6.4.1. Please download from here

Ver.6.5.1

  • It is possible to open the X3F files of Quattro series even when the driver of the graphic board is not updated to the latest version.

Ver.6.5.0

  • It is compatible with RAW data (X3F files, X3I files) of the sd Quattro H.
  • It increases the processing speed of RAW data in the Review Window and when it saves images, by utilizing the GPU (Graphics Processing Unit) (RAW data of sd Quattro series and dp Quattro series only).
  • It is compatible with thumbnails and shooting information of DNG files shot with the sd Quattro H (If the files are edited using other processing software compatible with DNG files, they will not be displayed).
  • It has an improved algorithm in Super Fine Detail Mode so that minor gaps between each frame are less visible.
  • It has an improved algorithm in noise reduction when developing RAW data for the sd Quattro series and dp Quattro series.
  • It has an updated Auto development algorithm of RAW data adjustment setting for the sd Quattro series and dp Quattro series.
  • It corrects the phenomenon whereby the parameter of Auto development is different when Display Quality or Display Speed is prioritized.
  • Preference Settings incorporates a mode whereby images transferred from Sigma Capture Pro will not open in the Review Window.
  • It incorporates an Update Information Notification function.
  • It displays messages for some functions by way of a pop-up notification.

Notice

  • If you have Windows 7 (64-bit) or Windows 8 (64-bit) installed on your computer, please install Windows Update Program (KB2929755) for x64-based system prior to SIGMA Photo Pro 6.5.3 installation. Please download Windows Update program (KB2929755) at Microsoft Windows Download Center if you need to download manually and install SIGMA Photo Pro 6.5.3 after finishing the system update.
  • Before you start the download of the installer program, make sure all applications in your computer are finished.
  • Click the download button, or push the right button of your mouse ("right click") and start download.
  • Make sure SPP_6.5.3_setup.exe is saved in the destination you specified.

Install

  • If you have "SIGMA Photo Pro 6.5.2" installed on your computer, uninstall it by using "Add or Remove Programs" on a computer. It is not possible to install "SIGMA Photo Pro 6.5.3" properly if "SIGMA Photo Pro 6.5.2" is already installed. You need to restart the computer soon after this software is uninstalled. After finishing installation, please reboot your computer.
  • Please start installing the software by double clicking the downloaded file, "SPP_6.5.3_setup.exe".
  • First, you have to choose the language of the program you install. Select the language and push the OK button.
  • Then, carry out the install according to the procedures displayed in the screen.
  • You need to restart the computer soon after this software is installed.

System Requirements

  • Equivalent to Intel® Core2 Duo Processor or more (Intel® Core™ i series or higher is recommended)
  • Windows 7, Windows 8 or Windows 10 is preinstalled (64bit OS is recommended)
  • 3GB or higher RAM (8GB or more is recommended)
  • 5GB of available hard disk space (10GB or more is recommended)
  • 24-bit (16,770,000 color) graphic card or higher
  • 1024x768 monitor resolution or higher
DOWNLOAD SPP_6.5.3_setup.exe (84.0 MB)

SIGMA
Photo Pro 6.5.3
for Macintosh

Main Features

Ver.6.5.3

  • It is compatible with the X3I files taken in the SFD Mode of the SIGMA dp Quattro series.
  • It has improved the processing speed of the SFD mode.
  • It has optimized the effect of the overexposure correction function.
  • It has corrected the phenomenon that an error may occur when starting the software while it is set to French or Russian language.
* The latest version of SIGMA Photo Pro 6.5.3 is required to process the RAW data (X3F and X3I files) taken by the dp Quattro series after the firmware update announced on April 26th * Since SIGMA Photo Pro ver. 6.5.0, it has changed the system requirements to OS ver. 10.9, 10.10, 10.11 and 10.12, and 3GB or higher RAM (8GB or more is recommended). * For customers who cannot use the GPU Acceleration Mode, please refer to this webpage.

Ver.6.5.2

  • It has improved the noise reduction during the RAW development from the X3F files of dp Quattro series and sd Quattro series.
  • It has improved the processing speed when the GPU Acceleration Mode is activated in the environmental setting (based on the computer environment, the effect may vary).
  • It corrects the phenomenon that some operational errors occur in specific computer environments, when GPU Acceleration Mode is activated.
  • It corrects the phenomenon that depending on a computer environment, an error occurs during RAW development, when the GPU Acceleration Mode is activated and multiple images are selected.

Ver.6.5.0

  • It is compatible with 64 bit OS.
  • It is compatible with macOS Sierra.
  • It is compatible with RAW data (X3F files, X3I files) of the sd Quattro H.
  • It increases the processing speed of RAW data in the Review Window and when it saves images, by utilizing the GPU (Graphics Processing Unit) (RAW data of sd Quattro series and dp Quattro series only).
  • It is compatible with thumbnails and shooting information of DNG files shot with the sd Quattro H (If the files are edited using other processing software compatible with DNG files, they will not be displayed).
  • It has an improved algorithm in Super Fine Detail Mode so that minor gaps between each frame are less visible.
  • It has an improved algorithm in noise reduction when developing RAW data for the sd Quattro series and dp Quattro series.
  • It has an updated Auto development algorithm of RAW data adjustment setting for the sd Quattro series and dp Quattro series.
  • It corrects the phenomenon whereby the parameter of Auto development is different when Display Quality or Display Speed is prioritized.
  • Preference Settings incorporates a mode whereby images transferred from Sigma Capture Pro will not open in the Review Window.
  • It incorporates an Update Information Notification function.
  • It displays messages for some functions by way of a pop-up notification.

Notice

  • Before starting the download of the installer program, make sure all applications in your computer are closed.
  • Click the download button, or push the mouse button whilst holding down the Control key on your keyboard (Control+ Click).
  • Select "download linked file" from the displayed menu. Start the download of the file.
  • After completing the download of "PhotoPro6.5.3.dmg" file, it will be mounted automatically and "PhotoPro.6.5.3" disk image will be displayed. If the file is not mounted automatically, please double click the "PhotoPro6.5.3.dmg" file. "PhotoPro6.5.3" disk image will then be displayed.
  • After installing the software, it will take a couple of minutes to boot for the first time. Please refrain from using other applications until it completes the start-up process.

Install

  • To start the instalation drag and copy SIGMA Photo Pro 6 folder from "PhotoPro6.5.3" Disk Image to applications folder. Installation will be completed after being copied to this folder.
  • Select and open the Applications folder from "Go" in the Finder menu.

System Requirements

  • Equivalent to Intel® Core2 Duo Processor or more (Intel® Core™ i series or higher is recommended)
  • Mac OS X Ver10.9, 10.10,10. 11,10. 12
  • 3GB or higher RAM (8GB or more is recommended)
  • 5GB of available hard disk space (10GB or more is recommended)
  • 24-bit (16,770,000 color) graphic card or higher
  • 1024x768 monitor resolution or higher
DOWNLOAD PhotoPro6.5.3.dmg (91.3 MB)