Download Lenses 24-70mm F2.8 DG DN A019 Firmware

Steps for Lens
Firmware Update

The following procedure is to update the lens firmware via SIGMA fp. For firmware updates of Leica and Panasonic L-Mount cameras, please follow the instruction manual for each camera.

Before updating

  • Please ensure that the firmware of the camera body is updated to the latest version.
  • Use a fully charged battery or connect the camera to the AC adapter.
  • Do not disconnect the battery or the AC adapter during the firmware update of the lens.
  • Ensure the power of the camera is always kept ON during the firmware update of the lens.
  • The lens needs to be attached to a camera to update the firmware.

How to check the firmware version of the lens

Turn on the camera after attaching the lens.
Press the MENU button on the back side of the camera body and open the setup menu.

Select “Firmware Update” from the setup menu.

After the OK button is pressed, “Camera” and “Lens” shows up. Please select “Lens”.

The firmware version that is installed in the lens will show up.
If the firmware version is “Ver.1.0” or older, it is necessary to download the new version and update.

STEP 01

Check the terms and conditions on the SIGMA Software Program License Agreement, and download the file if you agree with them. Select the directory and save the file.

SIGMA SOFTWARE PROGRAM LICENSE AGREEMENT

NOTICE: Read this before downloading, copying or using the Software Program.
Refrain from downloading the software unless you agree with the terms and conditions. These terms and conditions will be regarded as accepted when users select to download it.

Installing and using the Licensed Software Program for Firmware ("Licensed Software") indicates the acceptance of these terms and conditions when users select “download” button. Read all of the terms and conditions of this license agreement prior to installing or using the Licensed Software Program. If you do not accept these terms, you must delete the Licensed Software Program from your hardware.
Please note that you may not use, copy, modify or transfer the Licensed Software or documentation or any copy, except as expressly provided in this agreement.

License

This Licensed Software Program (the "Software") and the accompanying on-line read-me and help files (the "Documentation") are licensed, not sold, to you by SIGMA Corporation ("SIGMA"). Subject to the terms of this Agreement, you have a personal, nontransferable, nonexclusive and non-sublicensable right to use the Software solely for your personal or internal business purposes, and not for any further resale, re-license or other use by third parties. On condition that you own an applicable lens for update, you may use this Software on any computer or recording media owned by you or under your control. You agree to prevent and protect the contents of the Software and Documentation from unauthorized disclosure or use. SIGMA reserves all rights not expressly granted to you. SIGMA's licensors are the intended third party beneficiaries of this license agreement and have the express right to rely upon and directly enforce the terms set forth herein.

Limitation on Use.

You agree not to
i. assign, transfer, lease, rent or engage in any time-sharing of the Software,
ii. alter or modify the Software, in whole or in part,
iii. modify or create any derivative work of the Software, in whole or in part or,
iv. reverse assemble, decompile, reverse engineer or otherwise attempt to derive source code, the underlying ideas, algorithms, structure or organization of the Software in whole or in part.
You shall not remove, alter, cover or obfuscate any copyright notices or other proprietary rights notices placed or embedded by SIGMA on or in any Software or Documentation.

Restrictions

You may not sublicense, assign, delegate, rent, lease, time-share or otherwise transfer this license or any of the related rights or obligations for any reason. Any attempt to make any such sublicense, assignment, delegation or other transfer by you shall be void.

Copyright

The Software and related Documentation are copyrighted by SIGMA. You may only copy the Software (or this license) to update applicable lenses by computers or cameras which are owned by you or under your control. You may make one copy of the Documentation and print one copy of any on-line documentation or other materials provided to you in electronic form for each permitted copy of the Program. Any and all other copies of the Software and any copy of the Documentation made by you are in violation of this license.

Ownership

You agree that all rights, title and interest in and to the Software and Documentation including all intellectual property rights thereto belong to SIGMA. You agree that you neither own nor hereby acquire any claim or right of ownership to the Software and Documentation or to any related patents, copyrights, trademarks or other intellectual property. SIGMA retains all right, title and interest in and to the Documentation and all copies and the Software at all times, regardless of the form or media in or on which the original or other copies may subsequently exist. This license is not a sale of the original or any subsequent copy. All content accessed through the Software is the property of the applicable content owner and may be protected by applicable copyright law. This license gives you no rights to such content.

Limited Warranty.

SIGMA provides the Software and the documentation "as is" and specifically disclaim any warranty of any kind whether express, implied or statutory, including but not limited to the implied warranties of merchantability, non-infringement and fitness for a particular purpose. All risk of quality and performance of the Software and the Documentation is with you, the licensee. Should the Software prove defective, you, and not the SIGMA, shall assume the entire cost of any service and repair. This disclaimer of warranty constitutes an essential part of this Agreement.

Limitation of Remedies.

In no event will licensor nor any of SIGMA’s subsidiaries, be liable for any indirect damages or other relief arising out of your use or inability to use the Software including, by way of illustration and not limitation, lost profits, lost business or lost opportunity, or any indirect, special, incidental or consequential or exemplary damages, including legal fees, arising out of such use or inability to use the Software, even if licensor, its licensors, any of licensor’s subsidiaries, has BEEN advised of the possibility of such damages, or for any claim by any other party to the maximum extent permitted by law. These limitations shall apply notwithstanding the failure of the essential purpose of any limited remedy. Neither SIGMA, nor any of licensor’s subsidiaries, shall have any obligation to indemnify you against any claim or suit brought against you by a third party.

Applicable Law.

This license will be governed by the laws of Japan, without reference to conflicts of laws principles. All controversies and disputes arising out of or relating to this Agreement shall be submitted to the exclusive jurisdiction of the Tokyo District Court in Tokyo, Japan. The United Nations Convention on Contracts for the Sale of Goods does not apply to this license.

No Other Agreements.

This Agreement constitutes the entire agreement between the parties with respect to the Software and the Documentation, and supersedes any other written or oral agreement.

General Principle.

If any part of this Agreement is found void and unenforceable by any law or court, such provision shall be null and void. However, all the remaining part of the agreement shall remain in full force and effect.

General Provisions.

This warranty shall not apply in any case of amendment or alterations of the Software made by you.

DOWNLOAD S0110110.plf (525KB)

* After you agree to term, if the download does not complete even after clicking the download button, right-click and select “Save Target As ...”, to download.

STEP 02

Prepare SD/SDHC/SDXC card and format in camera. Note: Please make sure that important data is not inside your SD/SDHC/SDXC card before format.

STEP 03

For Windows
(It appears differently depending on OS version.)

For Macintosh
(It appears differently depending on OS version.)

Connect the SD/SDHC/SDXC card to the computer via card reader etc. and copy the downloaded file to the root directory (the top layer of the file structure) of the SD/SDHC/SDXC card. (The copy destination is not in the “DCIM” subfolder)

STEP 04

Insert the SD/SDHC/SDXC card with the firmware to the camera and turn on the power.

STEP 05

Press the MENU button on the back side of the camera body and open the setup menu.

STEP 06

Select “Update Firmware” and select “OK”.

STEP 07

After selecting the OK button, “Camera” and “Lens” appears on the display. Please select “Lens”.

STEP 08

The message “Start firmware update?” will appear on the display.

In case the message does not appear

In case the message “Start firmware update?” does not appear on the display, please check the following notes.

The firmware update file is not installed in the card, or not in the appropriate directory.

The update file may not be in the card or the firmware may not be in the specified directory. Please repeat STEP 02.

The correct firmware is not installed.

If the card contains a firmware version older than the lens, it cannot be updated. Put the correct version of firmware into the card and start over from STEP 03.

There is not enough battery.

Use a fully charged battery or an AC adapter and start over from STEP 03.

STEP 09

Select “Yes” to start the firmware update. Shortly the update will start.

Error

If the message “Firmware update has failed” is displayed during the firmware update, please contact our customer support.

STEP 10

「When "Firmware update is complete. It will restart automatically" is displayed, the update is complete. * Do not operate the camera until the update completion message appears.

STEP 11

Check the “Information” version in the setup menu and confirm the lens version is updated to Ver.1.1

Inquiries on the firmware update

For further inquiries on the firmware update, please contact your nearest authorized SIGMA subsidiary / distributor.
World Network