ELECTRONIC FLASH EF-630 Detailed Information

Mounts

SIGMA

Ver.

1.04

● It has corrected the phenomenon where it occasionally stops communicating after recovering from Auto Power Off. ※ SIGMA FLASH USB DOCK FD-11 for SIGMA with firmware Ver.1.01 will be required to update the firmware.
※ Before updating the firmware of the SIGMA ELECTRONIC FLASH EF-630, please update SIGMA Optimization Pro to Ver. 1.4.1 or later for Windows, and Ver. 1.4.0 or later for Macintosh.
※ It takes about 3 minutes to update the firmware.

Ver.

1.03

● It corrects the phenomenon that the distance display cannot be switched between meters and feet in custom mode.
● It corrects the phenomenon that it occasionally flashes unintentionally when the Sync. Terminal is used. ※ Please ensure to update SIGMA Optimization Pro to Ver1.4.1 for Windows, and Ver1.4.0 for Macintosh before updating the firmware.
※ It takes about 3 minutes to update the firmware.

Ver.

1.02

● It has supported the sd Quattro camera’s firmware which improves the color reproduction when the Flash mode is selected in the White balance setting. ※ It is necessary to update SIGMA sd Quattro camera’s firmware to the latest version.
※ The firmware can be updated using SIGMA FLASH USB DOCK FD-11 for SIGMA.
※ Please ensure to update SIGMA Optimization Pro to Ver1.4.1 for Windows, and Ver1.4.0 for Macintosh before updating the firmware.
※ It takes about 3 minutes to update.

Ver.

1.01

● The LCD Panel Light is now kept on continuously while selecting DISPLAY SETTING.
● It has changed the setting of Caution display to be two-stage to prevent overheating of the flashgun's circuitry after continuous firing.
● It has corrected the phenomenon where the correct serial number was not displayed. ※ Please check if correct serial number is displayed by reconnecting the ELECTRONIC FLASH EF-630 after completing the firmware update.
※ If you are using SIGMA Optimization Pro Ver1.3 or earlier, please ensure to update it to Ver1.3.1 before updating the firmware.
※ It takes about 3 minutes to update.

Mounts

Canon

Ver.

1.03

● It has corrected the phenomenon where it does not flash properly after recovering from Auto Power Off. ※ SIGMA FLASH USB DOCK FD-11 for SIGMA with firmware Ver.1.01 will be required to update the firmware.
※ Before updating the firmware of the SIGMA ELECTRONIC FLASH EF-630, please update SIGMA Optimization Pro to Ver. 1.4.1 or later for Windows, and Ver. 1.4.0 or later for Macintosh.
※ It takes about 3 minutes to update the firmware.

Ver.

1.02

● It corrects the phenomenon that the distance display cannot be switched between meters and feet in custom mode.
● It corrects the phenomenon that it occasionally flashes unintentionally when the Sync. Terminal is used. ※ Please ensure to update SIGMA Optimization Pro to Ver1.4.1 for Windows, and Ver1.4.0 for Macintosh before updating the firmware.
※ It takes about 3 minutes to update the firmware.

Ver.

1.01

● It has corrected the phenomenon that the flash does not fire when using the X Sync. contact in Manual Flash mode. ※ The firmware can be updated using SIGMA FLASH USB DOCK FD-11 for CANON with firmware Ver1.01.
※ Please ensure to update SIGMA Optimization Pro to Ver1.4.1 for Windows, and Ver1.4.0 for Macintosh before updating the firmware.
※ It takes about 3 minutes to update the firmware.

Mounts

Nikon

Ver.

1.01

● It improves the color tone of “TTL”, “TTL-BL” and “MANUAL” modes. ※ Please ensure to update SIGMA Optimization Pro to Ver1.4.1 for Windows, and Ver1.4.0 for Macintosh before updating the firmware.
※ It takes about 3 minutes to update the firmware.